PlasmaGLO™ Hair+ Cap
WHY CHOOSE LASER OR LED? WE DIDN’T.
300 LASER DIODES + 200 LED LIGHT POINTS. 4 WAVELENGTHS. 12 MINUTES. Most hair caps stop at one or two wavelengths—or make you choose between laser and LED. PlasmaGLO™ Hair+ Cap combines both LED and Laser in one flexible, cordless system.
300 laser diodes at 680 nm
140 red LED light points at 625 + 655 nm
60 blue LED light points at 422 nm
500 TOTAL LIGHT SOURCES
Together, these technologies are designed to support hair density and fullness for individuals experiencing concerns such as thinning hair, reduced hair density, and a receding hairline. A flexible light panel built into the cap contours to your head for a comfortable, cordless treatment. Use for 12 minutes every other day; the cap shuts off automatically.
FDA-CLEARED FOR ANDROGENETIC ALOPECIA IN MEN AND WOMEN
LIMITED LAUNCH DISCOUNT
The PlasmaGLO™ Hair+ Cap combines laser and LED light technology in a flexible, cordless system designed to support hair density and fuller-looking hair. The built-in therapy panel conforms to the shape of the head and secures inside the cap with magnets. No assembly is required.
The device is FDA-cleared for the treatment of androgenetic alopecia in specific adult populations. Its 500 light sources deliver four wavelengths across two modes:
- Mode 1 — Laser + Red Light: 300 laser diodes at 680 nm work alongside 140 red LED light points at 625 nm and 655 nm. The red LEDs illuminate first; the lasers activate automatically after a 30-second delay.
- Mode 2 — Blue Light: 60 blue LEDs at 422 nm. No laser light is emitted in this mode. Switch modes with a short press of the controller button.
Recommended Use
Use for one 12-minute session every other day for 16 consecutive weeks. The session ends automatically, with two beeps to signal completion. Use only on completely dry hair and scalp. First-time users should complete the light-sensitivity test described in the User Manual.
Technical Specifications
- Model: ZLD-500C
- Light sources: 300 laser diodes and 200 LED light points (140 red and 60 blue)
- Wavelengths: 625 ± 10 nm, 655 ± 10 nm, 680 ± 10 nm, and 422 ± 10 nm
- Optical power: <5 mW/cm²
- Energy delivered: 3.6 J/cm²
- Session length: 12 minutes with automatic shut-off
- Battery: Rechargeable 3.7 V / 750 mAh
- Charging: Dual USB-C cable; approximately 3–4 hours
- Ingress protection: IP22
- Laser classification: Class 1 laser product
- Applied part: Type BF
- Service life: 2 years
FDA-Cleared Indication
The PlasmaGLO™ Hair+ Cap is indicated for the treatment of androgenetic alopecia and hair growth promotion in males with Norwood-Hamilton classifications IIa–V and Fitzpatrick Skin Types I–IV, and in females with Ludwig-Savin Scale I-1 to I-4, II-1, II-2, or frontal patterns and Fitzpatrick Skin Types I–IV.
What’s Included
- PlasmaGLO™ Hair+ Cap
- Therapy panel with attached controller
- Dual USB-C charging cable (3.28 ft / 1 m)
- Storage bag
- Quick Start Guide and User Manual
Important Safety Information
For adult use only; do not use if under 22, pregnant or preparing for pregnancy. Other contraindications apply, including photosensitivity, light-triggered seizures, photosensitizing medication, active scalp wounds or infection, and cancerous scalp, head, or neck lesions. Use on the scalp only, do not look directly at the light sources, and do not share the device. Read the full User Manual and consult a physician if you are unsure whether the device is appropriate for you.
- FDA-cleared indication: For androgenetic alopecia in specified adult male and female populations.
- Laser + LED technology: 500 total light sources across four wavelengths, combining 300 laser diodes with 200 LED light points.
- Two light modes: Laser + red light in Mode 1, plus a separate blue LED mode with no laser emission.
- Flexible fit: The high-flex therapy panel conforms to the head and secures inside the cap with magnets.
- Simple session routine: 12-minute sessions every other day for 16 weeks, with automatic shut-off and audible completion signals.
- Cordless and rechargeable: Built-in battery, USB-C charging, and no cord required during a session.
- Laser safety delay: In Mode 1, the lasers activate 30 seconds after the red LEDs illuminate.
HOW TO USE
- Charge the panel fully before first use with the supplied dual USB-C cable.
- Make sure your scalp and hair are completely dry. The cap is used on clean, dry hair only.
- Put the cap on and adjust the Velcro strap at the back until it fits snugly. The pad is already inside and held by magnets — no assembly.
- Press and hold the control button for 1.5 seconds. One beep means the cap is on, in Mode 1.
- For Mode 2, short-press the button once. The blue light turns on.
- The session runs 12 minutes and ends automatically with two beeps.
- Use every other day for 16 consecutive weeks.
First-time users should complete the light sensitivity test described in the User Manual before their first full session.
